CAT 2 flame resistant clothing is arc-rated clothing with a minimum arc rating of 8 cal/cm². It is the second of four arc flash PPE categories in the US standard NFPA 70E. CAT 2 is the most common level for electricians and maintenance staff working near live equipment. A typical CAT 2 outfit is an arc-rated long-sleeve shirt and trousers, or an arc-rated coverall, worn with other protective gear.
Here is what CAT 2 means, what it includes and how to choose the best flame resistant clothing for the job.
What Are Arc Flash PPE Categories?
An arc flash is a sudden release of energy from an electrical fault. It can create extreme heat in a fraction of a second. NFPA 70E, the US standard for electrical safety in the workplace, sets four PPE categories. Each has a minimum arc rating for clothing.
| PPE category | Minimum arc rating | Typical clothing |
|---|---|---|
| CAT 1 | 4 cal/cm² | Arc-rated shirt and trousers or coverall |
| CAT 2 | 8 cal/cm² | Arc-rated shirt and trousers or coverall, plus face and head protection |
| CAT 3 | 25 cal/cm² | Arc flash suit or layered system with hood |
| CAT 4 | 40 cal/cm² | Multi-layer arc flash suit with hood |
These values are explained in this guide to NFPA 70E arc flash PPE categories. The current edition of the standard is NFPA 70E-2027, which replaced the 2024 edition. Always check the edition your company follows.
What Does a CAT 2 Kit Include?
When using the PPE category method, CAT 2 work usually calls for:
- Arc-rated long-sleeve shirt and trousers, or an arc-rated coverall, rated at least 8 cal/cm²
- Arc-rated face shield and arc-rated balaclava, or an arc flash hood
- Hard hat
- Safety glasses or goggles
- Hearing protection
- Rubber insulating gloves with leather protectors, or heavy-duty leather gloves where allowed
- Leather footwear
Your site’s risk assessment decides the exact kit.
How to Read an Arc Rating Label
Arc-rated clothing shows its rating on the label in cal/cm². You may see:
- ATPV (Arc Thermal Performance Value): the energy at which there is a 50 percent chance of a second-degree burn through the fabric
- EBT (Energy Breakopen Threshold): the energy at which the fabric is likely to break open
The label shows whichever is lower. For CAT 2, the number must be 8 cal/cm² or higher. In the US, arc-rated fabric is tested to ASTM F1506. In Europe, arc protection is tested to IEC 61482-2.
CAT 2 vs HRC 2
Older documents may say “HRC 2”, which stood for hazard risk category 2. NFPA 70E dropped the HRC name years ago. Today the correct term is PPE category 2, often written as CAT 2. The minimum rating of 8 cal/cm² is the same.
Choosing the Best Flame Resistant Clothing for CAT 2
Consider:
- Arc rating: at least 8 cal/cm²; many workers choose 8 to 12 cal/cm² single layers
- Fabric weight: lighter fabrics are cooler but may have lower ratings
- Inherent or treated FR: both work; inherent fibres keep protection for life
- Comfort: breathable fabric and good fit mean workers keep it on
- Fit: shirts long enough to stay tucked, sleeves that stay down when reaching
- Extras: hi-vis, antistatic and multi-norm features for mixed hazards
For women, a proper fit is critical. Read our guide to women’s flame resistant clothing.
Common CAT 2 Mistakes
- Wearing non-FR synthetic layers underneath
- Rolling up sleeves or leaving shirts untucked
- Using standard hi-vis vests over arc-rated clothing
- Using a face shield without an arc rating
- Keeping damaged or oil-soaked garments in service
Sourcing CAT 2 Garments
When sourcing CAT 2 clothing, check:
- Fabric test reports for arc rating from an accredited lab
- FR thread, zips and trims on every garment
- Arc rating and standard printed correctly on labels
- Fabric lots traced from mill to finished garment
- Labels and construction checked at final inspection
For FR basics, read what flame resistant clothing is.
How Integrated Overseas Helps
Integrated Overseas sources arc-rated and FR workwear in India for brands and distributors in the US, EU and UK. We coordinate arc and flame testing with accredited labs and trace fabric lots through production. Our inspectors check labels, seams and trims before every shipment.
Need a CAT 2 range? Contact our team.
FAQs
What is the minimum arc rating for CAT 2?
CAT 2 clothing must have a minimum arc rating of 8 cal/cm² under NFPA 70E.
Is CAT 2 the same as HRC 2?
Yes. HRC 2 is the old name. NFPA 70E now uses PPE category 2, or CAT 2, with the same 8 cal/cm² minimum.
What is ATPV?
ATPV is the arc energy at which there is a 50 percent chance of a second-degree burn through the fabric.
Can I wear a hi-vis vest over CAT 2 clothing?
Only if the vest is also arc-rated. A standard vest can melt or ignite in an arc flash.
