EN ISO 20345 Safety Footwear Standard Explained

EN ISO 20345 Safety Footwear Standard Explained

EN ISO 20345 is the international standard for safety footwear used at work. It sets the minimum safety rules for shoes and boots with a toe cap tested to 200 joules of impact. The current edition is EN ISO 20345:2022, amended in 2024. It replaced the 2011 edition and brought new categories, clearer puncture markings and a new slip resistance test.

If you buy, sell or make safety footwear for Europe or the UK, these changes affect your labels, catalogues and tenders.

What EN ISO 20345 Covers

The standard sets basic requirements for all safety footwear, such as:

  • A toe cap tested to 200 joules impact and 15 kilonewtons compression
  • Sole performance and slip resistance
  • Upper strength and comfort features
  • Correct marking and user information

It then adds optional requirements, shown by codes on each pair.

Key Changes in EN ISO 20345:2022

1. Slip resistance is now basic

The old SRA, SRB and SRC markings are gone. All safety footwear must now pass a basic slip test. Footwear that passes an extra, harder test on oil can carry the SR marking.

2. New puncture resistance markings

The 2022 edition describes “resistance to puncture” more clearly:

  • P: metal insert, tested with a 4.5 mm nail
  • PL: non-metal insert, tested with a large 4.5 mm nail
  • PS: non-metal insert, tested with a small 3 mm nail

This gives new combined categories such as S1PL, S1PS, S3L and S3S.

3. New S6 and S7 categories

S6 and S7 add water resistance for the whole shoe (WR), not just the upper. S6 is S2 plus WR. S7 is S3 plus WR.

4. Fuel oil resistance is optional

In the 2011 edition, fuel oil resistance was part of S1 to S3. Now it is optional and shown with the FO marking.

5. New optional tests

  • LG: ladder grip, for workers who climb ladders often
  • SC: scuff cap abrasion resistance, for kneeling work

Category Overview

Category Includes
SB Basic requirements, including toe cap and basic slip resistance
S1 SB plus closed heel, antistatic, heel energy absorption
S1P / S1PL / S1PS S1 plus metal or non-metal puncture resistance
S2 S1 plus water penetration resistance of the upper
S3 / S3L / S3S S2 plus puncture resistance and cleated outsole
S4 Polymer or rubber footwear with basic extras
S5 / S5L / S5S S4 plus puncture resistance and cleated outsole
S6 S2 plus whole-shoe water resistance
S7 / S7L / S7S S3 plus whole-shoe water resistance

Transition Dates

According to this summary of the EN ISO 20345 changes, safety shoes placed on the market after 30 March 2023 must be certified to EN ISO 20345:2022. Older certificates were phased out by November 2024, though stock already certified could stay on sale until its certificate expired, up to five years from issue. The 2024 amendment (A1) made further technical updates.

For buyers, this means:

  • New tenders should ask for EN ISO 20345:2022 certificates
  • Catalogue markings should show new codes, such as S3S instead of S3 with a textile midsole
  • Old stock should be checked for certificate validity

How to Read a Safety Shoe Label

A label might read: EN ISO 20345:2022 S3S SR FO HRO

  • EN ISO 20345:2022 is the standard
  • S3S means S3 with a small-nail non-metal puncture insert
  • SR means it passed the extra slip test
  • FO means fuel oil resistance
  • HRO means a heat-resistant outsole

Choosing the Right Category

  • Warehouse with smooth floors: S1P or S1PS shoes, ideally with SR
  • Construction site: S3, S3L or S3S boots
  • Wet outdoor work: S7 boots or S5 rubber boots
  • Oil and fuel present: add FO
  • Ladder work: add LG

For a wider overview, read our safety footwear guide.

How Integrated Overseas Helps

Integrated Overseas sources certified safety footwear in India for EU, UK and US buyers. We coordinate testing to EN ISO 20345:2022 and ASTM F2413, check toe caps and inserts from approved suppliers and inspect markings, sizing and sole bonding in every order through our footwear inspection services.

Updating your range to the 2022 standard? Speak to us.

FAQs

What is the latest version of EN ISO 20345?

The current version is EN ISO 20345:2022, updated by an amendment in 2024 (EN ISO 20345:2022+A1:2024).

What does S3S mean?

S3S means an S3 safety shoe with a non-metal puncture insert tested with a small 3 mm nail.

Why did SRC disappear?

The 2022 edition replaced SRA, SRB and SRC with a basic slip test for all shoes and an optional SR marking for higher slip resistance.

Are 2011-certified safety shoes still valid?

Stock certified under the 2011 edition could stay on sale until its certificate expired, but new certificates use the 2022 edition.