Garment Inspection Checklist: Defects Buyers Check

Garment Inspection Checklist: Defects Buyers Check

A garment inspection checks finished clothing against the buyer’s approved sample and specification. Inspectors look at fabric, stitching, measurements, colour, function, labels and packing. Each defect is marked as critical, major or minor. A clear checklist makes every quality inspection faster, fairer and easier to compare across suppliers.

Below is the checklist our inspectors use as a base for apparel and workwear.

How Defects Are Classified

Before you check anything, agree how defects will be graded.

  • Critical: A defect that could harm the user or break the law. Examples: a broken needle left in a garment, sharp metal edges, missing PPE marking.
  • Major: A defect that makes the product unfit to sell or likely to be returned. Examples: a hole, an open seam, a wrong size label.
  • Minor: A small flaw that does not affect use and may not be noticed. Examples: a short loose thread or a tiny mark on the inside.

The number of defects allowed in each class comes from your AQL levels. See our AQL inspection guide for details.

1. Fabric Check

  • Correct fabric type, weight and composition
  • Shade matches the approved sample
  • No shade difference between panels of one garment
  • No holes, slubs, snags or weaving faults
  • No stains, oil marks or chalk marks
  • No pilling or shine from pressing
  • Hand feel matches the approved sample

2. Stitching and Construction

  • Correct stitch type and stitches per inch
  • No broken, skipped or loose stitches
  • No open seams or raw edges
  • Seams lie flat with no puckering
  • Pockets, collars and cuffs are level and even
  • Bartacks at stress points, such as pocket corners
  • Hems are even and the right width

3. Measurements

  • Key points measured on several pieces per size
  • Each point within the agreed tolerance
  • No size mix-up between labels and actual size
  • Left and right sides match

Measurement problems often repeat across a whole size. If you see a pattern, flag it at once.

4. Colour and Appearance

  • Colour matches the approved lab dip or sample under the agreed light
  • Prints are sharp, in the right place and the right colours
  • Embroidery is complete, with no loose threads or puckering
  • No crease marks or press shine
  • Garment looks clean and well finished

5. Function and Safety

  • Zips run smoothly and lock
  • Buttons are secure and buttonholes are clean
  • Snaps and press studs close and open correctly
  • Drawcords meet child safety rules for kidswear
  • No sharp objects, pins or needles
  • Reflective tape is correct, straight and in place on hi-vis

6. Labels and Markings

Labels are a common reason for failed shipments and customs problems. Check:

  • Care label symbols and wording
  • Size label matches the actual size
  • Fibre content wording and percentages
  • Country of origin
  • Brand label in the right place
  • Hangtags, price tickets and barcodes scan correctly

In the EU, fibre names and content labels must follow the EU Textile Labelling Regulation. In the US, children’s products also need permanent tracking information on the product and packaging.

7. Packing

  • Correct folding method and polybag
  • Warning text on polybags where required
  • Correct size and colour mix in each carton
  • Carton marks match the packing list
  • Cartons are strong, sealed and the right weight
  • No damp cartons or smell of mould

Common Garment Defects at a Glance

Defect Usual class
Broken needle or metal part in garment Critical
Missing or wrong PPE marking Critical
Hole or tear Major
Open seam Major
Wrong size label Major
Clear shade difference between panels Major
Out-of-tolerance measurement Major or minor
Loose thread under 1 cm Minor
Small mark on inside Minor

Tips for a Fair Garment Inspection

  • Always check against the approved sample, not memory
  • Use the same light source for colour checks each time
  • Pick cartons at random from the whole lot
  • Photograph every defect type with a scale
  • Keep your checklist the same across suppliers so results compare fairly

How Integrated Overseas Helps

Our inspectors use a checklist like this on every garment inspection in India, Bangladesh, Vietnam and Laos. We tailor it to your product and market, from fashion to hi-vis and FR workwear. Every defect is photographed and logged in our digital report.

Want a checklist built for your range? Get in touch.

FAQs

What is the difference between a major and minor defect?

A major defect makes a garment unfit to sell or likely to be returned. A minor defect is small and does not affect use.

What should a garment inspection checklist include?

It should cover fabric, stitching, measurements, colour, function, labels, packing and safety, plus your AQL levels.

Are label errors serious?

Yes. Wrong care, size or fibre labels can lead to returns, customs delays and legal problems, so many buyers class them as major.

How do inspectors check colour?

They compare goods with the approved sample under a standard light, such as a light box, and check shade between panels.