AQL Inspection Explained: Levels, Chart and Sampling for Garments

AQL Inspection Explained: Levels, Chart and Sampling for Garments

AQL inspection is a way to judge a whole order by checking a random sample. AQL stands for acceptance quality limit. It tells the inspector how many pieces to check and how many defects are allowed before the order fails. It is the most common sampling method for garments, workwear and footwear.

Once you understand three things, the sample size, the AQL level and the accept number, AQL charts stop looking scary.

What Is AQL Inspection?

Checking every garment in a large order takes too long and costs too much. AQL sampling lets an inspector check a smaller, random sample and make a fair decision about the whole lot.

The method comes from the ISO 2859-1 sampling standard. ISO released a third edition in January 2026. It replaces the 1999 edition and adds skip-lot sampling and updated guidance. In the US, buyers may also see ANSI/ASQ Z1.4, which uses very similar tables.

The Three Things That Decide Your Result

1. Lot size

The lot size is the total number of pieces in the order or shipment being inspected.

2. Inspection level

The inspection level sets how big the sample is for a given lot size. Most garment buyers use General Inspection Level II. We explain all levels in our guide to AQL inspection levels.

3. AQL value

The AQL value sets how strict you are. A lower number means fewer defects are allowed. Most apparel buyers use three values:

  • Critical defects: 0. Any safety or legal defect fails the lot. Examples: a broken needle in a garment, missing reflective tape on hi-vis, a wrong CE label.
  • Major defects: 2.5. A defect that would likely lead to a return. Examples: an open seam, a hole or a wrong size label.
  • Minor defects: 4.0. A small flaw that does not stop use. Examples: a loose thread or a small stain on the inside.

Simple AQL Chart for Garments

This chart uses General Inspection Level II, normal inspection and single sampling from the ISO 2859-1 tables.

Lot size Sample size AQL 2.5 accept / reject AQL 4.0 accept / reject
281 to 500 50 3 / 4 5 / 6
501 to 1,200 80 5 / 6 7 / 8
1,201 to 3,200 125 7 / 8 10 / 11
3,201 to 10,000 200 10 / 11 14 / 15
10,001 to 35,000 315 14 / 15 21 / 22

“Accept” is the highest number of defects allowed. “Reject” is the number that fails the lot.

A Worked Example

You order 2,400 polo shirts. Your levels are 0 critical, 2.5 major and 4.0 minor at Level II.

  • Lot size 2,400 falls in the 1,201 to 3,200 band, so the sample is 125 shirts.
  • The inspector finds 0 critical, 6 major and 9 minor defects.
  • Major: 6 is below the reject number of 8, so it passes.
  • Minor: 9 is below the reject number of 11, so it passes.
  • Critical: 0 found, so it passes.

The lot passes. If the inspector had found 8 major defects, the lot would fail even if everything else was fine.

What AQL Does Not Do

AQL is a strong tool, but it has limits:

  • It does not mean a passed lot has zero defects. It means defects are likely below your limit.
  • It does not replace measurements, tests and label checks.
  • It cannot fix a bad sample. Cartons must be chosen at random from the whole lot.
  • It works best on orders of a few hundred pieces or more.

How to Choose Your AQL Levels

Start with the common levels above, then adjust:

  • Use tighter levels, such as 1.5 major, for premium products or brands with low return rates.
  • Keep critical at 0 for all PPE, kidswear and safety items.
  • Use a looser minor level for basic, low-price items if your customers accept it.

Write your levels into your purchase order or quality manual. This avoids arguments later.

Where AQL Fits in Your Quality Plan

AQL sampling is used at several points:

  • During production inspection, to find problems early
  • Pre-shipment inspection, before the final payment
  • Re-inspection, after a failed lot is sorted and repaired

How Integrated Overseas Helps

Our inspectors use ISO 2859-1 sampling on every garment inspection in India, Bangladesh, Vietnam and Laos. We help buyers set sensible AQL levels for each product type. Reports show the sample size, defect counts and the result, with photos of each defect.

Not sure which AQL levels fit your product? Ask our quality team.

FAQs

What does AQL 2.5 mean?

AQL 2.5 is the limit for major defects most garment buyers use. It sets the accept and reject numbers for your sample size in the ISO 2859-1 tables.

What is a good AQL for clothing?

Most clothing buyers use 0 for critical, 2.5 for major and 4.0 for minor defects at General Inspection Level II.

Is a lower AQL number stricter?

Yes. A lower AQL value allows fewer defects in the sample, so it is harder for a lot to pass.

Does passing AQL mean there are no defects?

No. It means the defect rate is likely within your limit. Some defective pieces may still be in the lot.